Spa Pumps And More
AQUA-FLO PUMP PARTS
CAL SPAS PUMP replacements
DURA JET Spa Pump Replacements
GRUNDFOS SPA PUMPS
JACUZZI & SUNDANCE SPA PUMPS
LAING SPA PUMPS
MARQUIS SPA PUMP Replacements
ULTRA JET® REPLACEMENT PUMPS
ULTRA JET® PUMP PARTS
WATERWAY PUMP PARTS
Spa Pump Motor Wiring
WATERWAY POOL PUMPS
Waterway Executive Pumps
WATERWAY 2 SPEED PUMPS
WATERWAY 1 SPEED PUMPS
Spa Heaters & Controls
Spa Control Info
AQUA-FLO Replacement Pumps
ULTRA JET® PUMPS - BALBOA WATER GROUP®
ULTRA JET® BATH PUMP REPLACEMENTS
WHIRLPOOL BATH PUMPS
BATH PUMP & TUB PARTS
Pedicure Chair Pumps & Parts
ULTRA JET® REPLACEMENTS
SPECIAL SPA PUMPS
ENERGY EFFICIENT PUMPS
HOT TUB PUMPS
INFO / Parts Lists
SPA PUMP MOTORS
Spa Pump Motors - 2 Speed
Motors 115 Volt 2-speed
Motors 230 Volt 2-speed
Spa Pump Motors - Single Speed
Motors 115 Volt 1-speed
Motors 230 Volt 1-speed
Spa Control & Heater & 10-11A 2-speed pump - Refurbish Your Spa, Hot Tub - Spa Pack - Spa Equipment Pack
Our Price: $599.00
Sale Price: $
Usually Ships in 1 to 2 Business Days
Spa Control & Heater System Complete with pump, heater, and control, 230 volt or 115 volt, 4000 watts or 1000 watts, ETL Listed for continuous use in spas & hot tubs, 2-speed 10-11a 115v pump, 4.0kw heater with time, and temperature control, programmable, convertible system, 115 volt OR 230 volts, shown with 2" plumbing fittings.
A very reliable system, the SmarTouch ePack SMTD1500 Digital Control has been used for years in the spa industry and has a great reputation for reliability. A nice system for portable spas, hot tubs, and baptistries.
The system is very flexible and easy to program, can be set to a temperature and programmed to run certain hours, or economy mode, etc. using the digital display keypad. Overall height about 12".
If run on 230 volts, this would draw about 19 amps and belongs on a 4-wire circuit WITH A NEUTRAL, on 30a GFCI breaker. On 115v it would draw only 12 amps and belongs on a 15 or 20a GFCI breaker. Other larger pumps are available too (at additional cost). Topside keypad/display has a 58" cable and measures 2.5x5.5"
This is a very good basic 2-speed system to refurbish your portable spa, includes set of power cords, owners manual, and topside display.
-Spa Control System with High Flow Heater
-Digital keypad/display 2.5x5.5"
-Power cord set
-2 speed Pump
-Fittings for 2" pvc piping connection (easily bushed down to 1-1/2" pipe size, order p/n 4214070)
- Reducers for fitting 1-1/2" PVC pipe, order here:
Reducer Bushings for 1-1/2" pipe
- Fittings to close couple pump to heater, order here:
Spa Pack Option Kit
- Optional shutoff valves, order 2 of them here:
2" Gate Valve
- Optional Topside Display/Keypad extension cable, order here:
10 foot long extension
- Upgrade small KP-1000 Topside to larger KP-2010 Topside order here:
Small to Large Option
-230 volts 4-wire with NEUTRAL, 40 amps, OR, 115 volts 15 or 20 amps operation.
-heater specs 240/115v 4000 watts/1000 watts, high flow, 20GPM minimum
-pump specs 115v 10-11 amps, 1100-1200 watts
-plumbing size 2" pvc schedule 40.
-rough in dimensions 26L x 16W x 12"T
-topside keypad/display 2.50 x 5.50" (for flush mount, drops into 1.9x4.9" cutout)
-elevation, to be mounted below water level, for priming.
-weather resistance, this is rated for use under the skirt of a portable spa.
-from the factory, incoming power is set to 4-wire 230 volts with neutral. Tell us if you want that changed,
otherwise it ships to you set for 4-wire 230v incoming.
Note on pump sizing, real, true output is always measured by volts x amps = watts. Spa makers apply horsepower stickers that often overstate true output, like putting 2hp stickers on a 1hp motor, so always looks at volts and amps to know what you are ordering.
Accessories for this product...
Spa Pack Option Kit - Left or Right Facing Pump Parts
Reducer Bushing PVC 2" x 1.5"S - pair (2) 421-4070
Share your knowledge of this product with other customers...
Be the first to write a review
Browse for more products in the same category as this item: