 |
 |
 |
|
E Series Spa Pack. 230 volt pump so you MUST have 230v available.
The SMTD1500P23010 includes:
SMTD1500 ePack control system complete (1)
400-5570 Pump Unions UN-P20 (2)
2 speed spa pump 230v 10a (1) 2300 watts 5.6" motor (48 frame)
Spa Control & Heater System Complete with pump, heater, and control, 230 volt, 4000 watts, ETL Listed for continuous use in spas & hot tubs, 2-speed 10a 230v Energy Efficient pump, 4.0kw heater with time, and temperature control, programmable, shown with 2" plumbing fittings.
A very reliable system, the SmarTouch ePack SMTD1500 Digital Control has been used for years in the spa industry and has a great reputation for reliability. A nice system for portable spas, hot tubs, and baptistry use.
The system is very flexible and easy to program, can be set to a temperature and programmed to run certain hours, or economy mode, etc. using the digital display keypad. Overall height about 12".
On 230 volts, this would draw about 27.4 amps and belongs on a 4-wire circuit WITH A NEUTRAL, on 40a GFCI breaker. Other larger pumps are available too (at additional cost). Topside keypad/display has a 58" cable and measures 2.5x5.5"
This is a very good basic 2-speed system to refurbish your portable spa, includes set of power cords, owners manual, and topside display.
E Series refers to our Spa Packs featuring the ePack by ACC, combined with matched spa pumps.
Includes:
-Spa Control System with High Flow Heater
-Digital keypad/display 2.5x5.5"
-Power cord set
-2 speed Pump
-Fittings for 2" pvc piping connection (easily bushed down to 1-1/2" pipe size, order p/n 4214070)
Options:
- Reducers for fitting 1-1/2" PVC pipe, order here: Reducer Bushings for 1-1/2" pipe
- Optional shutoff valves, order 2 of them here: 2" Slice Valve
- Optional Topside Display/Keypad extension cable, order here: 10 foot long extension
- Upgrade small KP-1000 Topside to larger KP-2010 Topside order here: Small to Large Option
Specifications:
-230 volts 4-wire with NEUTRAL, 40 amps operation.
-heater specs 240v 4000 watts watts, high flow, 20GPM minimum
-pump specs Energy Efficient 230v 10 amps, 48 frame, 5.6" motor
-plumbing size 2" pvc schedule 40.
-rough in dimensions 26L x 16W x 12"T
-topside keypad/display 2.50 x 5.50" (for flush mount, drops into 1.9x4.9" cutout)
-elevation, to be mounted below water level, for priming.
-weather resistance, this is rated for use under the skirt of a portable spa.
-from the factory, incoming power is set to 4-wire 230 volts with neutral.
Note on pump sizing, real, true output is always measured by volts x amps = watts. Spa makers apply horsepower stickers that often overstate true output, like putting 2hp stickers on a 1hp motor, so always looks at volts and amps to know what you are ordering.
|
|
|
 |
|
 |
| Accessories for this product... |
|
BWF-200 ACC WiFi Bluetooth Module for ACC Spa Controls fits SMTD1000, SMTD3000, SMTD2000, SMTD1500
|
|
Extension Cable for ACC controls, 11-EXT14-10 Spa Control Topside Keypad 10ft. , SC-ACCEXTENSION, ePack, SmarTouch, SMTD1000, SMTD2000 ComPack, SmarTouch Digital, Acura Spa 2660
|
|
Upgrade Small Topside to Large Topside when combined with a new complete ACC spa control system
|
|
640-3250V Suction Fitting White 1-1/2" socket 640-3250VP Waterway
|
|
|
|
|
|
|
|
|
|
|
|
|
Spa Light LED 12 volt Chromatherapy Bulb 27 LEDs with Selectable Color Changes
|
|
Spa Pump Slice Valve 2 Inch PVC pipe size, 880-2020, female socket. Permits pump removal without draining spa
|
|
WW5025010 Waterway Spa Filter, Top Load Cartridge 50 Sq. Ft. with Bypass Valve 2"S 502-5010
|
|
Reducer Bushing PVC 2" x 1.5"S - 421-4070
|
|
|
|
|
|
|
|
|
|
|
|
|