PUBFC165258 PUBSC165258 Spa Pump for Watkins Hot Springs Spas 115/230V 20/10A 1-spd Wavemaster 7000, 36675

Pump replacement for PUBSC165258 & PUBFC165258 Spa Pump for old Watkins Mfg., 36675 Hot Springs Spa pumps 115/230V 1-speed 2"SD/CS. Changeable voltage, runs on 230 volts or 115 volts, for Hot Springs Spas by Watkins Manufacturing, replacement for Wavemaster 7000, Dual voltage motor ships from factory set to 230 volts, can be changed to 115 volt operation, see motor label for wire change. Replacement for older Wavemaster pumps made by Ultra Jet ®. the old model know as the Big Foot pump, as shown in last photo.

This new replacement for the old Bigfoot is known as the Ultimax and the dimensions, position of the threads, and performance is the same as the old Big Foot pump it replaces. No other pump replaces the Bigfoot series as well as the Ultimax series. Power has been slightly improved to 10 amps.

Watkins/Hot Springs used Wavemaster 7000 on at least 5 different pumps, be aware of this. Part number 36675 has been used over the years on several different styles of pump heads from different manufacturers. Look closely at the photos of the style you are choosing before you order and if you have any doubts about which style to order send us a photo of your pump head and we can confirm. "36675" or "Wavemaster 7000" is NOT enough to define you old pump or find the proper
replacement, please note!

If you want the type made by Aqua-Flo, go here:

EX2 version

The factory ships these set for 230 volts. If you need to change it to 115v, move the brown wire from terminal 3 to 5. And move white wire from 5 to 6. see last 2 photos for how it should look set for 230v and for 115v.

Order optional union fitting seals here: Gaskets and O-Rings

These are new Ultra Jet® pump components assembled on new high quality US Motors or AO Smith/Century motors, and are replacement pumps compatible with Balboa Water Group® Ultra Jet® Pumps.