Home > Spa Packs >

Balboa VS510SZ VS510SZP2309 Spa Control & Heater & 8-10A 2-spd pump - Spa Pack - Spa Equipment Pack
Balboa VS510SZ Spa Control & Heater System Complete with pump, heater, and control, spa pack, hot tub heater, spa heater, spa motor,


 
Alternative Views:


Our Price: $1,385.00
Sale Price: $862.55

Availability:: In Stock
Product Code: VS510SZP2309

Description
 
VS510SZP2309 Balboa VS510SZ Spa Control & Heater System Complete with pump, heater, and control, 230 volt, 5500 watts, UL Listed for continuous use in spas & hot tubs, 2-speed 8.4-10.0a 230v Energy Efficient pump, 5.5kw heater with time, and temperature control, programmable, shown with 2" plumbing fittings.

Includes 2 speed 230v 8.4-10.0 amp pump with unions for 2 inch pipe size and Balboa VS510SZ Control system.

The Balboa 54218-Z Bundled Systems Retrofit Complete Kit (VS510SZ) is a complete spa pack kit ideal for retrofitting existing spas and hot tubs.

  • Minimum 2" piping requirement and 23 GPM minimum flow rate.
  • Includes topside control panel VL701S
  • Controls one dual-speed pump, one single-speed pump, blower, ozone and light (pumps must be 12.0 amps maximum rated.)
  • 230V incoming power required - 4 wire with neutral 60HZ
  • Default factory settings are:
  • Pump 1 230v 2-speed
  • Pump 2 230v 1-speed
  • Air Blower 230v
  • Spa Light 12v 1a
  • Ozonator 115v
  • Heater 230v 5.5kW
Voltage outputs are field changeable if the need arises.

Those who are familiar with basic plumbing and electrical skills will find the Balboa controls easy to set up and there is a ton of support info online for Balboa controls.The VS510SZ is also great for those with a working knowledge of Balboa setup procedure, jumper wire changes, dip switch settings, and the ability to read the included wiring diagram, and the initial startup procedure, as well as having a good working knowledge of Balboa Diagnostic Messages (error codes).

The Balboa Bundled System VS510SZ is a complete spa pack kit (Controls Primary Pump, Secondary Pump, Blower, Light, and Ozonator) ideal for retrofitting existing spas and hot tubs. It uses patented M7 sensor technology for better performance and improved safety. The kit features a topside control panel that offers control over your spa's primary pump, secondary pump, blower, light, and ozonator, for complete regulation, and an overlay that labels all functions and buttons. Its topside adapter and cords operate on a 240V power supply with integrated functionality that makes the VS510SZ Retrofit Kit both convenient to install and reliable in performance.

The VS510SZ Retrofit Kit includes everything needed for installation, including the 240V heater unit, a spa light assembly (without lens), the retro-fit topside adapter plate, one 2-speed pump cord, two 1-speed cords, and a serial standard topside control panel with overlay. It installs into 2" plumbing for operation. Ozone cord is optional.

Balboa Operation Guide

Balboa Common Topside Messages

Balboa Tech Support and techsupport@balboawater.com

Balboa M7 Information

Balboa VS510SZ Tech Sheet

Controller Dimensions (Approx): 12" L x 11" H x 4.5" W

Heater Dimensions (Approx): 15" L x 2" Diameter

Topside Panel Dimensions (Approx): 7.25" L x 3.25" W

Topside Cover Plate Dimensions (Approx): 8.5" L x 3.5" W

VS701 Cutout Template

Balboa Hot Sheet VS510SZ


Accessories for this product...
WW5025010 Waterway Spa Filter, Top Load Cartridge 50 Sq. Ft. with Bypass Valve 2"S 502-5010 Pump/Motor mounting pad for 48 frame motors & most 56 frame motors 319-0019, by Waterway Plastics. Motor Base Suction Fitting White 1-1/2" socket 640-3250VP Waterway Spa Light LED 12 volt Chromatherapy Bulb 27 LEDs with Selectable Color Changes
Sale Price: $134.20

Add
Sale Price: $5.95

Add
Sale Price: $14.25

Add
Our Price: $25.27

Add
WW5025010 Waterway Spa Filter, Top Load Cartridge 50 Sq. Ft. 502-5010 Waterway motor mounting pad 319-0019 Suction Fitting White 1-1/2" socket 640-3250VP Waterway Spa Light LED 12 volt Chromatherapy Bulb 27 LEDs with Selectable Color Changes, LED-27, 1-LED27
SMTD1500P23012LX ePack Control & Heater & 12A 2-speed 56 frame pump - Refurbish Your Spa, Hot Tub - Spa Pack - Spa Equipment Pack, LX Pump 56WUA400-ii, SMTD1500 Pump Power Cord for 1 speed pump, air blower, ozonator; 3 wires and a 4 pin AMP Plug 48" cord length Pump Wire Harness
Sale Price: $634.00

Add
Sale Price: $15.90

Add
Lingxiao pump, 56WUA400-ii, SMTD1500, ePack, Spa Control & Heater System Complete with pump, heater, and control, spa pack, hot tub heater, spa heater, spa motor 1 speed spa pump power cord AMP connector

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Spa Packs