BHS-55-3W, 20-08421, BCS-55-3W, Baptismal Equipment System, Hydroquip Baptistry Heater

BHS-55-3W BCS-55-3W Baptismal Heater 5.5kW Hydroquip Baptistry Heater. BCS553W

This model has a 5.5kw heater for 3-wire 240v without a neutral. 15 incn long or 13 inch long heater.

Choices are 13" (Item No. C08BK00-0001120) or 15" long heater (Item No.C08BK00-0006120) PLEASE SPECIFY

NO AIR SWITCH INCLUDED, THIS MODEL IS CONTROLLED ONLY VIA THE THERMOSTAT. Does NOT have an output
for a pump. You must have a pump, and install this heater on the discharge line and when you turn your pump on,
it will make water flow and pressure, which will activate the heater pressure switch, allowing the heater to come one. Very
simple and reliable as long as you have good water flow and no air in the piping system. Questions, call us please.

PLEASE SPECIFY IF YOU NEED 13.0" LONG HEATER FLANGE TO FLANGE OR 15.0" FLANGE TO FLANGE. Do this in the
order comments box towards the end of the checkout process. Just state " 13 inch " or " 15 inch " and we will make it so.

Does NOT include a circulation pump. Replaces old Therm Products p/n 20-08421.

Dimensions: 29"H x 15"W x 10"D Total Amp Draw: 24A on 240v. Minimum Space: 36"H x 16"W x 10"D

(the complete BES-55 has 115v pump, and can be used on 120/208/240 volts. BES-15 is the all 120 volt model with 1.375kw heater.)

PLEASE VERIFY YOU HAVE 3 WIRE 230V NO NEUTRAL.

The heater and control AND PUMP are available complete, see p/n BES-55

BCS-55-3W has a manual thermostat. Installation manual, owners manual, heater 'ON' indicator light, and wiring diagram are all standard equipment. Call us or email us to discuss your application, we are experienced with baptistry systems and here to help you.