Home > JACUZZI & SUNDANCE SPA PUMPS >

56WUA400-ii WUA400-ii LX Spa Pump WUA400- ii 2-spd 60Hz 230V 12A welded mounting bracket
56WUA400-ii WUA400-ii LX Spa Pump, WUA400-ii, 05334012-2040, 3721621-1W, 3M21621-1W, 05334012-2040, 05825489, 56WUA400-ll, 05340009-5040, WUA400, WUA400-ii, PUM6BHP, PUM22901106, PUM6BHP-56F2S240V


 
Alternative Views:


Price: $409.40
Sale Price: $239.00


Availability:: In Stock
Product Code: 56WUA400-II

Description
 
56WUA400-ii WUA400-ii LX Spa Pump 2-speed, 60Hz 230V, 12.0/3.5A 56Fr 6.5" diam. 2" SD/CS, Energy-Rite WUA400-ii, a nice replacement for AQUA-FLO XP2e 05334012-2040 and 0534009-5040 and for Waterway EX2 3721621-1W 56 frame pumps.

These are sometimes stickered as 4HP and sometimes as 6HP, depending on the hot tub maker's request, but they
are identical, both are 12 amps 230 volts, same performance no matter what sticker they apply.

Threads measure 3.1" outside diameter. 56WUA400-ll, WUA400, WUA400-ii, used by Cal Spas, Sundance Spas and Jacuzzi Spas,
PUM6BHP, PUM22901106, 0982601-03, PUM22000951, PUM6BHP-56F2S240V. A nice replacement for old Power Right PRC-505 pumps and others.

When unavailable use the Made in the USA equivalent rated 12 amps: American made 12 amp 230v 2 speed

This is an original, new, genuine LX WUA400-ii and labelled as 4.0 horsepower, when it is shipped to Sundance Spa, Jacuzzi Spas, and other, they mark it up as a 6 horsepower, but it is still a 12 amp motor doing 12 amps of work. Real output is always measured by volts x amps = watts, so this is a 2760 watt pump and can be stickered as 4hp, 5hp, 6hp, and even 7hp but the stickers do not change the performance.

This has a permanently affixed, welded steel mounting bracket under the motor, it is not the clamp on sliding mount type used by Jacuzzi.

It can be used to replace 6500-365 pumps if your old pump discharge is pointed to the 12:00, 3:00, or 6:00 positions, it will not work for pumps where the discharge is pointed to 10:30 or 1:30 positions.

This is a 12 amp 230 volt 2760 watt motor originally labelled as 4.0hp by the LX factory by it is often 'uprated' by hot tub makers, and re-sticked as 5hp, 6hp, 7hp, etc., but it is still a 12 amp pump.

The welded steel base under the motor is not removable. This is NOT the special Sundance/Jacuzzi motor with their special Patented moveable base, this is the original design with permanently mounted, welded base.

Accessories for this product...
Air Switched CS6009-US1 Pneumatic Spa Control runs pump, blower, light, ozonator Pump Power Cord 72" 2 spd pump 4 wire AMP Plug 72" 30-0326-72 30-1001A UNRN20 Repair Nut for Pump Union Coupling 2 inch PVC Pipe Size UNRN20. sold individually. 3.00" ID Threads. 10-BARBLX 3/8" Barbed Drain Plug fits late model LX pumps. pack of 1 fitting.
Sale Price: $444.00

Add
Sale Price: $21.00

Add
Sale Price: $9.30

Add
Sale Price: $4.90

Add
Hydro-Quip CS6009-US1 Pneumatic Spa Control Kit 30-0326-72 power cord 72" AMP connector 14/4 30-1001A spa pump repair coupling UNRN20 10-BARBLX 3/8" Barbed Drain Plug fits LX Pumps, A29070014, F02010021
Pump/Motor mounting pad for 48 frame motors & most 56 frame motors 61-0001 319-0019, by Waterway Plastics. Motor Base ACC Applied Computer Controls ePack p/n SMTD1500 SMTD-1500-PAL Spa Control Pump Union Gaskets for 2 inch PVC Pipe Size pumps. 2 Pack, 711-4010 61-0016-k
Sale Price: $6.50

Add
Sale Price: $357.00

Add
Sale Price: $4.50

Add
Waterway motor mounting pad 319-0019 61-0001 Spa Control ACC ePack SMTD-1500-PAL Hot Tub Heater, SMTD1500, SMTD 1500, Applied Computer Controls, ePack Spa Control System, SmarTouch Digital Spa Control Pump Union Gaskets for 3 inch threaded spa pumps, 711-4010, 7114010 61-0016-k

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

JACUZZI & SUNDANCE SPA PUMPS
AQUA-FLO Pumps > AQUA-FLO Replacement Pumps
LX Pumps