341031010 Waterway Spa Pump 1-speed 48FR 115V 9.8-12 amp 3410310-10 1hp Hi-Flo 2" SD/CS SD-75-1N11CB, SD-10-1N11CB, SD-07-1N11CB, Sparco, Proline

Waterway 3410310-15 SP-75-1N11CB Aqua-Flo Pump replacement 341031015 SP751N11CB .. see full replacement

Pool Pump Trap for pumps with 1-1/2" PVC pipe size - Threads on 1-1/2" pumps measure approximately 2-7/16" outside diameter. Ideal for smaller pools, waterfalls and water features, and ponds. Thread on union fits pumps with center inlet, and works with center or side discharge pumps. Inlet has O.D. threads for optional union coupling, and I.D. threads 1-1/2" NPT. Waterway 310-5400 3105400, inlet threads are 2.4" outside diameter, and threaded union on pump side is for 2.4" O.D. pump threads.

Pool Pump Trap for pumps with 2" PVC pipe size - Threads on 2" pumps measure approximately 3" outside diameter. Ideal for smaller pools, waterfalls and water features, and ponds. Thread on union fits pumps with center inlet, and works with center or side discharge pumps. Inlet has O.D. threads for optional union coupling, and I.D. threads 2" FPT. by Waterway 310-6600 3106600 Designed to thread onto industry standard threaded pumps with 3.1" outside diameter pump threads. Connection to front inlet on trap is done with 2" union, such as part number UN-P20. Intake threads measure 3.1" outside diameter, and threaded union nut on pump side is for 3.1" O.D. pump threads.

Pump Union Adapter - Changes 2" pump inlet to 2-1/2" pump inlet. If you make a mistake and order a 2 inch inlet pump and really needed 2-1/2 inch, this adapter coverts the pump quickly and inexpensively. Does NOT fit non-Waterway pumps!....see full description

Waterway Above Ground Pool Pump Wet End with Trap, 1.5 HP 1-1/2" inlet/outlet, has NPT I.D. threads, and accepts optional 1-1/2"S union couplings on O.D. threads. Side Discharge design for higher performance. Removeable 6" trap provides self priming. Ideal for above ground pools, spas, waterfalls, ponds, and water features. Also available in 1.0 hp rating. Wet End 310-5400 Trap & PW15SD15 Wet End

Waterway Above Ground Pool Pump Wet End with Trap, 1.5 HP 2" inlet/outlet, has NPT I.D. threads, and accepts optional 2"S union couplings on O.D. threads. Side Discharge design for higher performance. Removeable 6" trap provides self priming. Ideal for above ground pools, spas, waterfalls, ponds, and water features. Also available in 1.0 hp rating. 310-6600 Trap & 310-1140SD PW15HF20 Wet End

Waterway Above Ground Swimming Pool Pump Wet End with Trap, 1.5 HP Center Discharge 1-1/2" inlet/outlet, has NPT I.D. threads, and accepts optional union couplings on O.D. threads. Ideal for above ground pools, waterfalls and water features, and ponds. Waterway pumps are made in the U.S.A., and well supported with genuine Waterway Pump Parts. 310-5400 Trap & 310-1140 PW15CD15 Wet End

Waterway Above Ground Swimming Pool Pump 3/4 HP single speed 115 volt 1-1/2", 3410314-1549, 3410413-1549, 34104131549

Waterway Above Ground Swimming Pool Pump Center Discharge 3410410-1549, 1.0 HP single speed 115 volt 1-1/2" inlet/outlet, not the same as 3410413-1549 which is only rated 10.0 amps

Waterway Above-Ground Swimming Pool Pump 3.0hp 2-speed 56Fr 10A 230V 60hz 2" in/out, by Waterway Plastics

Waterway Hi-Flo Above Ground Pool Pump 1.0 HP single speed 115 volt, Waterway Plastics p/n PH1100-3S, PH1100-6S

Waterway Inground Swimming Pool Pump SVL56 High Flow 56fr Tow Speed 1.5 hp 10.0/3.5A 230v, 2" or 2.5"S, SVL56S-215

Waterway Inground Swimming Pool Pump SVL56 High Flow 56fr 1hp 115/230v, 2" or 2.5"S, SVL56S-110

Waterway Inground Swimming Pool Pump SVL56 High Flow 56fr 2.0 hp 11.0 / 4.0 Amp 230v, 2" or 2.5"S, SVL56S-220 2-speed

Waterway Iron Might Pond Pump 1/8 HP 1-speed 230v 1.5" inlet/outlet

Waterway Iron Might Pond Pump 1/8 HP 1-speed 115v 1.5" inlet/outlet

Waterway Pump Two speed 56 frame 230V 60hz 2" inlet/outlet

Waterway Self-Priming Pump 1.0 HP Two Speed 115 volt 1-1/2" inlet/outlet

Waterway SMF-110 Inground Swimming Pool Pump 1.0 hp, 2"S single speed. Super quiet, efficient, and self-priming. Ships with pump unions for 2 inch PVC pipe size. for outdoor operation. Self-priming, large trap and leaf basket. 60hz. Approximate dimensions 11-3/4" height, 10" width, 26" overall length. Listed UL. Also available in 2 speed models, and in 1/2, 3/4, 1.5, and 2.0 horsepower. Allow 5-10 business days to ship out. Waterway builds these to order

Waterway Spa Pump Seal - Shaft Seal Kit for Waterway EX2, Viper, Supreme, Genesis Pumps, and recent Iron Might, Spa Flo & Center Discharge pumps 2014-present. 319-3010B

Waterway Spa Pump Seal - Shaft Seal Kit for Waterway Executive, Hi-Flo, Center Discharge, Workman, Side Discharge, and Iron Might Pumps 319-3100B Genuine, original Waterway Pump replacement parts. Waterway seals p/n 3193100B, also for Waterway Bath Pumps (but not the new Genesis pump)