Home > Spa Controls >

Balboa VS510SZ Spa Control & Spa Heater & Cords for 2 spa pumps blower light ozonator VL701S Topside
VS510SZ Balboa Spa Control & Spa Heater & Cords for 2 spa pumps blower light ozonator VL701S Topside


 
Alternative Views:


Our Price: $785.00
Sale Price: $685.00

Availability:: Built to Order
Product Code: VS510SZ

Description
 

The Balboa 54218-Z Bundled Systems Retrofit Complete Kit (VS510SZ) is a complete spa pack kit ideal for experienced installers for retrofitting existing spas and hot tubs.

  • Minimum 2" piping requirement and 23 GPM minimum flow rate.
  • Includes topside control panel VL701S
  • Controls one dual-speed pump, one single-speed pump, blower, ozone and light (pumps must be 12.0 amps maximum rated.)
  • 230V incoming power required - 4 wire with neutral 60HZ
  • Default factory settings are:
  • Pump 1 230v 2-speed
  • Pump 2 230v 1-speed
  • Air Blower 230v
  • Spa Light 12v 1a
  • Ozonator 115v
  • Heater 230v 5.5kW
The VS510SZ is for experienced installers with a good working knowledge of Balboa setup procedure, jumper wire changes, dip switch settings, and the ability to read the included wiring diagram, and the initial startup procedure, as well as having a good working knowledge of Balboa Diagnostic Messages (error codes). Balboa requires any and all service should be performed by a licensed spa technician.

The Balboa Bundled System VS510SZ is a complete spa pack kit (Controls Primary Pump, Secondary Pump, Blower, Light, and Ozonator) ideal for retrofitting existing spas and hot tubs. It uses patented M7 sensor technology for better performance and improved safety. The kit features a topside control panel that offers control over your spa's primary pump, secondary pump, blower, light, and ozonator, for complete regulation, and an overlay that labels all functions and buttons. Its topside adapter and cords operate on a 240V power supply with integrated functionality that makes the VS510SZ Retrofit Kit both convenient to install and reliable in performance.

The VS510SZ Retrofit Kit includes everything needed for installation, including the 240V heater unit, a spa light assembly (without lens), the retro-fit topside adapter, one 2-speed pump cord, three 1-speed pump cords, and a serial standard topside control panel with overlay. It installs into 2" plumbing for operation.

Balboa Operation Guide

Balboa Common Topside Messages

Balboa Tech Support and techsupport@balboawater.com

Balboa M7 Information

Balboa VS510SZ Tech Sheet

Controller Dimensions (Approx): 12" L x 11" H x 4.5" W

Heater Dimensions (Approx): 15" L x 2" Diameter

Topside Panel Dimensions (Approx): 7.25" L x 3.25" W

Topside Cover Plate Dimensions (Approx): 8.5" L x 3.5" W

VS701 Cutout Template

Balboa Hot Sheet VS510SZ

Accessories for this product...
Spa Light LED 12 volt Chromatherapy Bulb 10 LEDs with Selectable Color Changes LED10 LED-10 SMTD1000 ACC Spa Control with Spa Heater & Cords 60hz 230v or 115v Topside, ACC SMTD 1000 SMTD1000 SmarTouch Digital 1000 - ground shipping Spa Light LED 12 volt Chromatherapy Bulb 27 LEDs with Selectable Color Changes
Our Price: $16.10

Add
Sale Price: $375.00

Add
Our Price: $25.27

Add
Spa Light LED 12 volt Chromatherapy Bulb 10 LEDs with Selectable Color Changes, 1-led10, led9, led10 SmarTouch Digital 1000 Applied Computer Controls ACC SMTD1000 SMTD 1000 Spa Control SmarTouch 1000, SC-CE155Control, 1-CE155-2-2024-P1B1, Onyx ON6KW1, ON6KW2, baptistry, baptistry heater Spa Light LED 12 volt Chromatherapy Bulb 27 LEDs with Selectable Color Changes, LED-27, 1-LED27

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Spa Controls