Motor, Circ Pump, 115 volt, single speed, 1725 RPM, 1.6 Amp 48 frame 5.5 inches diameter, for Waterway Iron Might, Waterway Circ Pump, and other 48 frame Circ Pumps. This is a bare motor exactly as shown, no water pump.
Ultra Jet ® MTRMPV736 Motor for Wow Pumps™ F35A01A03 'CAS' Motor can be used for any air switched version of WOW pump. Bare motor with no pump ships with power cord and air switch. PPMTRW736, now available as 5.5 amp or 7.5 amp motors. Now made by Marathon Motors. Motor only, no pump, just as shown. Can be used to replace old e-switched motors such as f35a03a03 if you eliminate the E-switch know and replace it with air tubing and air button.If you want a pump and motor take a look at these choices: WOW Vertical Discharge or Wow horizontal pump
1 speed 115V 48FR 09.8A 5.6" diameter bath pump motor w/ airswitch & powercord, see p/n
MTRGE-3632 motor 48 frame 115 volt 9.9 amp 1-speed w/ airswitch & powercord. An older GE motor for whirlpool bath pumps, fits PUUF, and PUUT, and PUUL series bath pumps by Ultra Jet®. Used on whirlpool bath pumps, and pedicure spa pumps. 5KH36JN3632BX 1111034,Fits PUUFCAS708BR, PUUFSCAS1098BR, and others. No longer available, replaced by http://www.spapumpsandmore.com/1_speed_115V_48FR_09_8A_5_5_Century_177893_p/mtraos-177893.htm
Century Motor 115 volt 12 amps 60 hz Single Speed BN25 5.6" diameter 48 frame fits many .. see full description
Century Motor 7-177895-25 BV35, 115 volt 17 amps 60 hz Single Speed 5.5" diameter 48 frame fits many spa and bath pumps. This is the original, stock motor used by Waterway pump company, on Waterway bath pumps, and on Waterway spa pumps. This BV35 A.O. Smith Century pump motor is suitable for any 5.5 inch diameter, 48 frame pump replacement. MTRAOS-177895, Note, this is a bare motor exactly as shown, no water pump included.
MTRAOS-182688 Waterway Motor, Motor A.O. Smith 1-speed 115/230 Volt 20.0/10.0 Amps 60Hz 5.5" Diam., Original Equipment Motor for many Pumps. MOD 7-182688-02 BN40
MTR-USEZBN24 Bath Pump Motor 115v 10.0a 1-spd air switch, power cord, 5.6" diameter 48fr, replaces old GE motor MTR-GE3632 and others with similar specs. Overall length not including motor shaft is 8.1", recommended as a replacement for BN24 EZBN24, GE 3632, MTRGE-3632, PUUF, PUUT, PUUL series bath pumps as well as pumps by Waterway, Hydrabaths, GruberHydro, Hydrodynamic, and others., Note, this is a bare motor exactly as shown, no water pump included. Replaces old GE motor 5KH36JN3632BX, -3632,
This motor mounting pad fits under any 48 frame pump assembly, and under most other 56 frame motors and pumps, by Waterway, Hydrabaths, Jacuzzi, Aqua-flo, and others. Used by many bath pumps.