United Spa Controls & Heater System Complete with pump, heater, and control, 230 volt or 115 volt, 5000 watts or 1250 watts, ETL Listed for continuous use in spas & hot tubs, 2-speed 7.6/3.0a 115v Energy Efficient pump, 5.0kw heater with time, and temperature control, programmable, convertible system, 115 volt OR 230 volts, shown with 2" plumbing fittings.
A very reliable system, the United Spa Controls C5 Digital Control has been used for years in the spa industry and has a great reputation for reliability. A nice system for portable spas, hot tubs, and baptistry use.
The system is very flexible and easy to program, can be set to a temperature and programmed using the digital display keypad. Overall height about 11".This is a very good basic 2-speed system to refurbish your portable spa, includes set of power cords, owners manual, and topside display. And larger pumps are available at additional cost just email or call us with your old motor volts and amps rating.
If run on 230 volts, this would draw about 25.5 amps and belongs on a 4-wire circuit with a neutral, on 40a GFCI breaker. On 115v it would draw only 14 amps and belongs on a 20a GFCI breaker. Other larger pumps are available too (at additional cost). Topside keypad/display has a 9' cable and measures 2.5x5.0"
-Spa Control System with High Flow Heater
-Digital keypad/display 2.5x5"
-Power cord set, for light, topside, temp sensor, main 2-speed pump, air blower, second 1-speed pump.
-2 speed Pump
-Fittings for 2" pvc piping connection (easily bushed down to 1-1/2" pipe size, order p/n 4214070)
- Reducers for fitting 1-1/2" PVC pipe, order here: Reducer Bushings for 1-1/2" pipe
- Fittings to close couple pump to heater, order here: Spa Pack Option Kit
- Optional shutoff valves, order 2 of them here: 2" Gate Valve
-230 volts 4-wire 40 amps, OR, 115 volts 20 amps operation.
-heater specs 240/115v 5000 watts/1250 watts, high flow, 20GPM minimum
-pump specs 115v 7.6 amps
-plumbing size 2" pvc schedule 40.
-rough in dimensions 26L x 16W x 12"T
-topside keypad/display 2.50 x 5" (for flush mount, drops into a round 1-3/4" cutout)
-elevation, to be mounted below water level, for priming.
-weather resistance, this is rated for use under the skirt of a portable spa.
-from the factory, incoming power is set to 4-wire 230 volts with neutral. Tell us if you want that changed.
Note on pump sizing, real, true
output is always measured by volts x amps = watts. Spa makers apply
horsepower stickers that often overstate true output, like putting 2hp
stickers on a 1hp motor, so always looks at volts and amps to know what
you are ordering.