Spa Control ACC ePack-LF SMTD-1500-LF Hot Tub Heater, SMTD1500 low flow

SMTD1500LF ePack-LF ACC Spa Control with Low Flow Spa Heater and Cords, SMTD-1500-LF for 1 spa pump, blower, light, and ozonator 230v or 115v changeable voltages. Includes topside Keypad, 2.5 x 5.5" and User's Manual, warranty card, with heater connections for 3/4" INSIDE diameter vinyl tubing size.

Heater fittings will be 3/4" barbed and either straight or 90 degree, your choice and you must specify your choice. If you do not specify you will be sent the straight connectors.

Includes power cords for your existing 2-speed pump (4-wire 40" cord), air blower (simple pigtail to splice to your existing air blower cord), light pigtail, and ozonator pigtail. And a cord for your circ pump. The ACC plugs provided must be used as they have their own pin pattern.

Topside keypad has 57" long cable, and an optional extension cable is available just ask about it.

Dimensions 11.25" tall, 10.5" wide, 3.5" deep. Low Flow Heater is standard 15 inches flange to flange, and is an extra long 4000 watt heater on 240 volts. 1000 watts on 120 volts. Cutout for keypad should be 1.7 x 4.7"

If you'd like the larger 3.25x7.25" top side (drops into a 2.2x6.2" cutout) just ORDER UPGRADE HERE

In the notes at the end of the order process, you can specify voltages for each item, pump can be 230 or 115v, blower also, ozonator also, and light is only available as 12 volts.

The factory ePack default settings are:

115 volt Circ Pump

230v 4-wire incoming power

230v to heater

115v to pump

115v to air blower or second pump

12v to light

115v output for an accessory, ozonator, etc.

2 year warranty from ACC the manufacturer. Rugged polymer enclosure means it won't rust away when exposed to the hot moist environment under the hot tub. This is not an outdoor unit, it is meant to be installed under the skirt of a portable spa.

This control is for 4-wire 230v incoming power or for 115v power, it is not for old European style 3-wire 230v please note.

ETL Listed. A rugged, and proven design. Excellent for replacing any spa control, replaces Hydra-Quip, Gecko, Nuwave, Acura, and other spa controls, and is generally more cost effective than replacing just the motherboard on a control. SmarTouch Digital 1500 Applied Computer Controls ACC SMTD1500 SMTD 1500 Spa Control SmarTouch 1500, ePack. Spa Control ACC ePack SMTD-1500-PAL Hot Tub Heater, SMTD1500, SMTD 1500, Applied Computer Controls, used by Phoenix Spas, United Spas of Modesto, and others, refurbish your hot tub with a new spa control and heater by ACC.

NOTE: Optionally available with a larger topside keypad 3.25x7.25" just ask us. Shipping weight 13 lbs. Hole size for small 2.5" is 1.7x4.7"

Steps to convert ePack from 230v incoming power to 115v incoming:

http://www.spapumpsandmore.com/ProductDetails.asp?ProductCode=ACC120vConversion