Spa Pumps And More
Spa Hot Tub Pumps
Aqua-Flo 2-Speed Pumps
Aqua-Flo 115V 2-Speed Pumps
Aqua-Flo 230V 2-Speed Pumps
Aqua-Flo 1-Speed Pumps
Aqua-Flo 115V 1-Speed Pumps
Aqua-Flo 230V 1-Speed Pumps
AQUA-FLO PUMP PARTS
AQUA-FLO Replacement Pumps
CAL SPAS PUMP replacements
DURA JET Spa Pump Replacements
GRUNDFOS SPA PUMPS
JACUZZI & SUNDANCE SPA PUMPS
HAYWARD Spa Pump Replacements
HOT SPRINGS / WATKINS PUMPS
LAING SPA PUMPS
MARQUIS SPA PUMP Replacements
MOTORS for SPA PUMPS
Spa Pump Motors - 2 Speed
Motors 115 Volt 2-speed
Motors 230 Volt 2-speed
Spa Pump Motors - Single Speed
Motors 115 Volt 1-speed
Motors 230 Volt 1-speed
ULTRA JET® PUMPS - BALBOA WATER GROUP®
ULTRA JET® REPLACEMENT PUMPS
ULTRA JET® PUMP PARTS
ULTRA JET® PUMP IMPELLERS
ULTRA JET® PUMP SEAL REPLACEMENTS
ULTRA JET® PUMP WET ENDS
ULTRA JET® PARTS
WATERWAY SPA PUMPS
WATERWAY PUMP PARTS
Spa Pump Wet Ends - Waterway
Waterway Spa Pump Impellers
Hot Tub Spa Pump Parts - Waterway
Hot Tub Spa Pump Seals - Waterway
Waterway Executive Pumps
Executive 3.7" Intake Threads
Executive Pumps 3.1" Threads
WATERWAY 2 SPEED PUMPS
Waterway 115V 2-Speed Pumps
Waterway 230V 2-Speed Pumps
WATERWAY 1 SPEED PUMPS
Waterway 115V 1-Speed Pumps
Waterway 230V 1-Speed Pumps
Spa Controls & Heaters
Spa Control Parts & Info
SPA HEATERS & PARTS
Spa Heater Elements & Parts
ULTRA JET® BATH PUMP REPLACEMENTS
WHIRLPOOL BATH PUMPS
BATH PUMP & TUB PARTS
Pedicure Chair Pumps & Parts
INFO / Parts Lists
WATERWAY POOL PUMPS
Pool Pump Wet Ends
Spa Control & Heater & 8A 2-speed pump - Refurbish Your Spa, Hot Tub, Baptistry - Spa Pack - Spa Equipment Pack - free 48 state shipping
Our Price: $659.00
Sale Price: $
Usually Ships in 1 to 2 Business Days
Spa Control & Heater System Complete with pump, heater, and control, 230 volt or 115 volt, 4000 watts or 1000 watts, ETL Listed for continuous use in spas & hot tubs, 2-speed 7.6a 115v pump, 4.0kw heater with time, and temperature control, programmable, convertible system, 115 volt OR 230 volts, shown with 2" plumbing fittings.
A very reliable system, the SmarTouch ePack SMTD1500 Digital Control has been used for years in the spa industry and has a great reputation for reliability. A nice system for portable spas, hot tubs, and baptistries.
This listing includes ground shipping to lower 48 states to your street address, no P.O. Boxes
The system is very flexible and easy to program, can be set to a temperature and programmed to run certain hours, or economy mode, etc. using the digital display keypad.
Overall height about 12".
If run on 230 volts, this would draw about 19 amps and belongs on a 4-wire circuit with a neutral, on 30a GFCI breaker. On 115v it would draw only 12 amps and belongs on a 15 or 20a GFCI breaker. Other larger pumps are available too (at additional cost). Topside keypad/display has a 58" cable and measures 2.5x5.5" and drops into a 1.7 x 4.7" cutout.
This is a very good basic 2-speed system to refurbish your portable spa, includes set of power cords, owners manual, and topside display.
-Spa Control System with High Flow Heater
-Digital keypad/display 2.5x5.5"
-Power cord set
-2 speed Pump
-Fittings for 2" pvc piping connection (easily bushed down to 1-1/2" pipe size, order p/n 4214070)
- Reducers for fitting 1-1/2" PVC pipe, order here:
Reducer Bushings for 1-1/2" pipe
- Fittings to close couple pump to heater, order here:
Spa Pack Option Kit
- Optional shutoff valves, order 2 of them here:
2" Gate Valve
- Optional Topside Display/Keypad extension cable, order here:
10 foot long extension
- Upgrade small KP-1000 Topside to larger KP-2010 Topside order here:
Small to Large Option
-230 volts 4-wire 30 amps, OR, 115 volts 15 amps operation.
-heater specs 240/115v 4000 watts/1000 watts, high flow, 20GPM minimum
-pump specs 115v 8.8/2.6 amps
-plumbing size 2" pvc schedule 40.
-rough in dimensions 26L x 16W x 12"T
-topside keypad/display 2.50 x 5.50" (for flush mount, drops into 1.9x4.9" cutout)
-elevation, to be mounted below water level, for priming.
-weather resistance, this is rated for use under the skirt of a portable spa.
-from the factory, incoming power is set to 4-wire 230 volts with neutral. Tell us if you want that changed.
Note on pump sizing, real, true output is always measured by volts x amps = watts. Spa makers apply horsepower stickers that often overstate true output, like putting 2hp stickers on a 1hp motor, so always looks at volts and amps to know what you are ordering.
Accessories for this product...
WW5025010 Waterway Spa Filter, Top Load Cartridge 50 Sq. Ft. with Bypass Valve 2"S 502-5010
Reducer Bushing PVC 2" x 1.5"S - pair (2) 421-4070
Pump/Motor equipment base, 672-1000 by Waterway Plastics 26x16" fits spa controls and pumps 6721000
Sale Price: $100.00
Sale Price: $25.00
Spa Control & Heater & 9.5-10.8A 2-speed pump - Refurbish Your Spa, Hot Tub, or Baptistry - Spa Pack - Spa Equipment Pack
Spa Control & Heater & 7.6A 2-spd pump - Refurbish Spa, Hot Tub, Baptistry - Spa Pack - Spa Equipment Pack, CBT7P1158
Spa Control & Heater & 12A 2-speed 56 frame pump - Refurbish Your Spa, Hot Tub - Spa Pack - Spa Equipment Pack, LX Pump 56WUA400-ii, SMTD1500
Spa Control & Heater & 7.6A 2-spd pump - Refurbish Spa, Hot Tub, Baptistry - Spa Pack - Spa Equipment Pack, SMTD1500P1159
Sale Price: $515.00
Sale Price: $535.00
Sale Price: $565.40
Sale Price: $499.00
Share your knowledge of this product with other customers...
Be the first to write a review
Browse for more products in the same category as this item: