Sundance Pump Wet End - 2.0" CS/SD - Fits Theramax pumps with 5.6" diameter motor rated 11-13 Amps 230V 48Fr works for Big Foot pump replacement
Sundance Spa Pump Wet End- for Theramax Pumps with 5.6" Diameter motors 230v Rated 11-13 amps, 2.0" CS/SD - sometimes referred to as the Piranha pump, may be used as a suitable replacement for old Big Foot pump wet end. For old PUBFS250258220 pumps, but note that the threaded intake is shorter than a Big foot by about 1/2" and so some installers like to use the old Big Foot front cover on the new pump head so that plumbing lines up perfectly. The old cover will fit the new pump perfectly as Sundance copied the old Big Foot perfectly.
Fits units marked Theramax.
Threads measure 3-1/16" O.D. Impeller has 7 vanes.
Note: This is a replacement pump head complete that fits 48 frame motors, includes everything but the motor. It does include the seals, impeller, etc., and is an assembled, tested replacement wet end.
Wet End ROTATE TO 7:30 7:30 O'CLOCK PUMP HEAD POSITION AS SHOWN 7:30 for TheraMax & TheraFlo pumps only - This is NOT a pump, it is a SERVICE.
Turn Pump Head 90 Degrees to " 7:30 O'Clock " Position as shown in photo here. This is an option that can only be done at the time you order a complete pump. This is often done by the spa manufacturer, to fit their plumbing configuration. If no option is specified, pumps ship out in their original factory orientation, the " 12 O'Clock " position. 7:30, 7:30 oclock, 730, 7:30 o'clock, this option is only available on Theramax and Theraflo pumps by Sundance, Jacuzzi, TheraMax 6500-268, TheraMax 6500-768