Baptistry Heater System Complete with pump, heater, and SMTD 1000 control, 230 volt or 115 volt, 5500 watts or 1375 watts, ETL Listed for continuous use in pools & tubs, silent running 1.3a 115v 1725 RPM Circulation pump, 5.5kw heater with time, and temperature control, programmable, convertible system, 115 volt or 230 volts, shown with 1-1/2" plumbing fittings. Baptismal heating system.
Unlike typical industrial immersion heaters, which are not Listed for use in water with people, the heater is extensively tested and Listed for use with people in tubs & pools. This Iron Might pump is very low amp draw, the fittings provided allow easy connection of pump to heater. A very reliable system, the SmarTouch Digital Control has been used for years in the spa industry and has a great reputation for reliability.
The Iron Might pump carries a 12 month warranty from the manufacturer, Waterway. The heater and control are warranted by ACC. The system is very flexible and easy to program, can be set to a temperature and programmed to run certain hours, or economy mode, etc. using the digital display keypad. Shown in the photos with OPTIONAL plastic base which is available upon request. Base is not required, and is not included in this item. Size is 26 x 16" on this optional base plate. Overall height about 14".
Run on 230 volts, this would draw about 24.6 amps and belongs on a 4-wire circuit with a neutral, on a 30 or 40a GFCI breaker. On 115v it would draw only 13.3 amps and belongs on a 20a GFCI breaker. Other options include hair & lint trap, cartridge filter, larger pumps available too.
This unit is not designed to LIFT water out of a pool, this requires a pool pump with integral leaf trap/basket. Please email us if you need this feature, we will recommend a higher speed pump for you. The above included Iron Might pump is excellent for water circulation, heating, and filtration. If you need a pump to drive water flow to a fountain or a long distance, or lift out of a pool of water below the level of the pump, email us the details and we will help with pump selection. If you need a plastic base, email us please. It is an extra cost item, about $20 and we do need an email requesting it beforehand.
-Heater with controller
-Power cord set
-Fittings for pvc piping connection
-230 volts 4-wire 30 amps or 115 volts 15 amps operation.
-heater specs 240/115v 5500 watts/1375 watts
-pump specs 115v 1.3 amps
-plumbing size 1-1/2" pvc schedule 40.
-rough in dimensions 26L x 16W x 13"T
-topside keypad/display 2.50 x 5.50" (for flush mount, drops into 1.9x4.9" cutout)
-weight approx 33 lbs total.
-elevation, to be mounted below water level, for priming.
-weather resistance, this is indoor rated not for outdoor use.
Baptistry Heater System, Baptismal Heating System, Baptistry heater, baptistry pump, baptistry, baptistery heater, baptistery system, baptistery pump, baptistery, baptistry heater parts, baptistry heater systems, baptistry heater pump, baptistry heater and pump, baptistry heater element, baptistry heater installation, baptistry heater filter